Shimmer Sleeping Princess Night Light

This product only contains Chinese instructions, English instructions can be viewed on the website

Size:

• 9.8x9.8x20 cm / 3.86x3.86x7.87 inch

Material:

• PVC, Vinyl, ABS

Light Type:

• LED(2800-3000K)

Rated voltage:

• 5V-1A

Rated power:

• 0.2W

Battery capacity:

• 800mAh

Recharging current:

• 700mA

Instructions:

1. The product has a built-in rechargeable battery, which can be used while charging, with a charging indicator, which is red during charging and turns white when fully charged.
2. Button 1: Power switch, press and hold for 2 seconds to turn on, click button 1 again to switch the light constant light mode/candle light atmosphere effect mode, the candle light atmosphere light effect mode is flickering, weak simulation candle brightness, long press button 1 for 3 seconds to shut down
3. Button 2: When the light is always on, the brightness can be adjusted in four gears. Click button 2 to cycle from 1 to 4 gears.
4. Blow-out function: After turning on the machine, if the light is on, blow it against the receiving hole under Duoer's neck to turn off the light.
5. Tap the light function: When the machine is turned on, if the light is off, tap the camera body to turn on the light, press and hold the button 1 to turn off the camera, and then tap the camera body to turn on the light.
6. Using USBC interface, equipped with USBA to C charging cable, can be connected to any USBA port power supply.
7. Using soft warm yellow light, you can switch the ambient light state or constant light mode by pressing button 1, or adjust different brightness by pressing button 2.

Attention:

• This product is not a children's toy. In order to prevent accidental injury due to improper use, please use it under the supervision of an adult!
• If an accident occurs due to improper use, please seek medical attention immediately;
• Do not disassemble or modify this product without authorization;
• It is forbidden to use the night light after it is immersed in water;
• Please avoid huge vibration or high-altitude drop impact when using the product;
• Do not place the night light in humid, high temperature and other areas;
• Do not use it in places (such as swimming pools, hot springs, kitchens, etc.) where there is hot air or fireworks, such as heating equipment, where a lot of dust, mist and oil fume are likely to be generated;
• When using a charger to charge, please purchase or use a charger that has obtained CCC certification and meets the standard requirements:
• When not in use, please clean up the oil on the surface of the night light, and store it in a dry and ventilated place to avoid squeezing.
• If the product is not used for a long time, please do not connect the power charging cable all the time.